-
S.
Høiland
(2026) Study on the Use of Generative Design for Structural
Optimization of an Upright for a Formula Student Car
-
H.S.
Vivås
(2026) Comparison of Variable Speed and Throttling Control for a
Centrifugal Pump
-
A.
M. Sheikhassen
(2026) Machine learning based optimization of process parameters in
FDM printing to improve product quality
-
S.
Hannisdal
(2025H) Numerical and experimental investigation of stress
distribution in expanding pin systems
-
B.
Worku (2025,
WU) Improving Production Environment Through Lean Manufacturing in
Manufacturing of Plastic PanelsL: The case of HK Business Group.
-
J.
Birhanu (2025,
WU) Surface
Roughness Optimization in Turning of Al6061 Using Taguchi
Design of Experiment and Response Surface Analysis.
-
D.
Teketel (2025,
JU) Surface
Contact Fatigue Crack Study Of spur gear Using Finite Element Method
-
S.S.
Haga,
(2025), Automated clamping to drilling riser
-
B.A.
Ohm,
(2025), Development of an Automated System for Offshore Wind Turbine Blade Maintenance
-
M.O.
Danial,
(2025), Experimental and numerical Study and Optimization of Curing Cycles for improved sustainability
-
T.
Goncalves,
(2025), Lifecycle Analysis of AM-enabled and Conventional Supply Chains in the scope of Downtime reduction
-
E.
Haugland,
(2025), Design and optimization of a flange tensioning tool
-
R.A.
Burca,
(2025), Design and optimization of a flange tensioning tool
-
D.
Shapiro (2024),
The
Arm - Enhancing Patient Training Simulators Through Modular Product
Architecture
-
Y.
T. Abdisa
(2024, WU), Influence of Climatic Conditions on Physio-Mechanical
Properties of Sisal –Epoxy Composite Materials; A Comparative
Study of Local Sisal Fibers from Jimma Arjo and Asosa Zone
-
H.
Likisa (2024,
WU) Experimental study of silicon carbide and graphite reinforced
aluminum matrix composites: a case for aerospace application
-
E.
Hacihamud
(2022), Buckling capacity evaluation of stiuffened panels using
non-linear finite element methods
-
M.H.
Jørs,
(2022), Product development of a Seawater hydraulics
-
N.S.
Kurukkal
(2022), Study of medical image data transformation techniques and compatibility analysis for 3D printing
-
H.
Hovland
(2021) Development of charing tower for shuttle boats
-
D.
U. Dina (2021,
JU), Analytical and numerical analysis of mixed-mode I/II fatigue
crack growth path and life prediction
-
J.
Gari
(2021, AASTU), Design optimization of composite over wrapped
pressure vessel by finite element methods
-
M.
Saaedi
(2021) Predicting cancer tumor position in liver using FEA and AI
-
M.
Andeassen
(2021) Conceptual design and feasibility study of wet mate electric
stub
-
R.H.
Helle
(2021) Conceptual design and feasibility study of a ROV operated
subsea fluid connector
-
S.S.
Langeroodi (2021)
Expanding PIN system - Optimizing of pin in heavy machine joint
applications.
-
Y.
Elkhayat (2021)
Study of the characteristics of AET signals for structural health
monitoring.
-
B.
G. N. Nguyen
(2020) Study
of the Characteristics of AE Signals
-
M.
Akhtar (2020)
Expanding
PIN System – Combined radial and axial locking system
-
S.
Rasmussen
(2020) Finite
Element Modelling and Analysis of Axial Settlement of Light Poles
-
O.-G.
Valborgland (2020) Torque Transfer System for offshore
Turret Production System
-
K.
Dawood
(2019) Use of Accoustic Emission Testing for Offshore Jackets
-
E.T.
Halvorsen
(2019) Study
of the multibody dynamic performance of wind turbine drive train
using MSC ADAMS
-
N.D.
Tilahun
(2019, AASTU) Mechanical
Behavior and Vibration Analysis of Fiber Reinforced Polymer
Composite Beams Using Numerical Method
-
T.B.
Gemechu
(2019, AASTU) Mechanical
Property Characterization of False Banana/Glass Fiber
Reinforced Hybrid Composite Materials for Wind Turbine Blades under
Fatigue Load.
-
J.D.
Balango (2019,
AASTU) Fabrication and characterization of a novel natural fiber and
its composite extraction from Acacia Tortilis bark
-
I.
Tafese (2019,
JU) The Study of Stress Crack Propagation of Disc Brake under
Thermomechanical Loads Using Numerical Methods.
-
G.
Gudeta (2019,
JU) Modelling of fatigue crack propagation in rail wheel
-
S.H.
Gebremariam
(2019) Study
of Expanding PIN with Combined Axial and Radial Locking Mechanism
(Bondura Technology)
-
Y.
Dabesa (2018,
JU) Modelling, analysis and investigating the effects of turnout on
wear and rolling contact fatigue life of wheel rails: Case study on
Addis Ababa light rail transit
-
T.O.
Terefe
(2018, JU) Synthesis and analysis of walking machine (robot) leg
mechanism on a rough terrain
-
T. I. Berge
(2018)
Comparative
Study and Simulation of
Suspension System Using Vehicle Dynamics Simulation Tools
-
E.
Fossesholm (2018)
Design
and evaluation of wave energy converter mechanism (Device)
-
K.
Ydstebø
(2017) Capacity
of a bolted T-stub connection between different materials subjected
to tension and thermal load (co-).
-
A.
Akessa (2016)
Functionality
risks associated with dimensional, geometrical and strength
deviations in 3D printed parts
-
I.
Berkani (2016)
Contact
stress and temperature variation analysis of Bondura bolts:
Numerical and experimental based study
-
E.
Strohaug (2016)
Optimal
design for projectile and blast protection during pressure testing
-
H.
Vestli (2016) Structural
Health Monitoring of Offshore Jackets (co-)
-
E. Halvorsen (2015)
Experimental
determination and analysis of effective method for determining
appropriate torque used to install MSAS-valves
-
L.K.H.
Andersen
(2015) Subsea tie-in Design Solutions and Optimisation
-
A.
Sabaredzovic (2014/15)
Modular Design and Structural Analysis of Access Stair Tower
for Kværner Stord.
-
N.
Svendsen
(2014) Dynamic Analysis of Damping System for FS racing car Using
ADAMS Multibody Dynamics Simulation.
-
T.
M. Tran (2014) Study
of the Effects of Impact Energy from Ship Collision on Jacket Structures
-
T.
Carlsen
(2014) Customized Design and Finite Element Analysis of Functions in
a Tensile Test Machine
-
C.L.
Andersen
(2013) Modeling,
Analysis and Testing of the Steering System in a Formula Student Car
-
R.L.
Banos (2013)
Analysis
of Performance and Design of Anchor Systems of a Single-body
Wave Energy Converter
-
V.A.
Brevik (2013) Design,
Analysis and Simulation of the Suspension System in a Formula
Student Car
-
J.
Ohnstad (2013) Experimental
Study of Indentation Related to Slips Design for Well Intervention
Plug
-
J.
Taboada (2012), Design Study of
Wave Energy Converter
-
J.
Grøtteland (2011), Concept
Development, Design and Calculation of a Drilling Rig for a Computer
Controlled Boomer
-
P.
Østmoe (2011), Modeling
and Dynamic Analysis of an Eccentric Gearbox System for Wind Turbine.
-
S.
Kurtovic (2011), Modeling
and Strength Analysis of Composite Materials for Boat Docking.
-
S.
Hermansen (2011), Study
and Application of the Virtual Design and Construction (VDC)
Principle
-
B.D.
Stiber (2010), Non-linear modeling of fluid-structure for flexible wind Turbine
blade
-
J.
Hauge (2010), Modelling and analysis of a bearing in an eccentric gear system.
-
T.H.
Petersen (2010), Design
verification of a winch for an offshore construction
-
T. J. Haaland
(2009), Automation options for shifting nozzle
plates on extrusion press.
-
L. O. Normark
(2008), Design of ROV Launch and Recovery
System.
-
T. Svartvatn
(2007), Dynamical
Analysis of a Jar Device for Use in Coiled Tubing Drilling Using
Finite Element Methods.
-
K.
Korneliussen
(2007), Wet
Towing of a Subsea Structure.
-
K.
Syrous (2006),
Analysis
of Expandable Tubular Using Finite Element Methods.
